Kinesis authentic Advantage Bluetooth Controller

This is an open source bluetooth controller for the Kinesis Advantage and Advantage 2 line of keyboards using the BlueMicro firmware. Also compatible with most older models (anything with 'KB' in the serial number should be a good fit).

Out of the box, this board is programmed with a layout that replicates the stock Advantage QWERTY layout (including the keypad!). The onboard key remap feature is not supported yet, however.

Each kit comes with a full set of connectors to work with any of the Kinesis Advantage models listed. Use your existing controller as reference before you solder in the new connectors!

Note that the board will not power on until either

a) a power switch is added to J14 (recommended) OR
b) J14 is shorted as pictured.

In addition to this kit, you'll also need a rechargeable LiPo battery, reset switch, and a power switch. Hardware recommendations can be found on this product's github page.

Design files and recommendations for additional hardware for your install can be found here. https://github.com/wizarddata/Blue-Wizard-Mod

Firmware can be found here. https://github.com/jpconstantineau/BlueMicro_BLE/tree/develop authentic